TP-LINK TL-SG108E VLAN Confusion
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-LINK TL-SG108E VLAN Confusion
Region : UnitedStates
Model : TL-SL2210WEB
Hardware Version :
Firmware Version :
ISP :
My Network is as follows:
Cisco 1142 Access Point (VLAN 1 Management, VLAN 50 Home, VLAN 152 Guest, VLAN 160 Gaming)
|
( Port 1 VLAN 50,152,160)
|
TP-LINK TL-SG108E ----( Port 7 VLAN 152,160) --- guest router --- Internet
| |
| ( Port 8 VLAN 50, PVID VLAN 50)
| |
( Port 7 VLAN 50) 24 port unmanaged switch
|
Router
|
Internet
For the most part, everything works. However I have trouble accessing some cameras and other devices that are connected to the 24 port switch through the TP-Link Switch. I can ping all windows machines back and forth. I can even access one camera from the AP to the 24 port switch.
Model : TL-SL2210WEB
Hardware Version :
Firmware Version :
ISP :
My Network is as follows:
Cisco 1142 Access Point (VLAN 1 Management, VLAN 50 Home, VLAN 152 Guest, VLAN 160 Gaming)
|
( Port 1 VLAN 50,152,160)
|
TP-LINK TL-SG108E ----( Port 7 VLAN 152,160) --- guest router --- Internet
| |
| ( Port 8 VLAN 50, PVID VLAN 50)
| |
( Port 7 VLAN 50) 24 port unmanaged switch
|
Router
|
Internet
For the most part, everything works. However I have trouble accessing some cameras and other devices that are connected to the 24 port switch through the TP-Link Switch. I can ping all windows machines back and forth. I can even access one camera from the AP to the 24 port switch.