Signal Strength between CPE510 & WA901ND at 5km?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Signal Strength between CPE510 & WA901ND at 5km?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Signal Strength between CPE510 & WA901ND at 5km?
Signal Strength between CPE510 & WA901ND at 5km?
2015-07-03 16:23:57
Region : Argentina

Model : TL-WA5210G

Hardware Version : V2

Firmware Version :

ISP :


Im curious with my WiFi Strength, dbi and dbm. Before im going to test, I would like to ask is it possible I can tx/rx the signals between both AP before I install them.

Here's the details:

1) I have CPE510 13dbi at Point A (5-10ft height from ground level)
2) I have TL-WA901ND v3.1 with 2.5Ghz 24dbi Yagi Antenna at Point B (5-10ft height from ground level)
3) In between the Point A & B is a rural and urban area, approx height 70-100 meters height from ground
4) approx straight-distance from A to B less than 5 km.
5) Used borrowed portable test-towers located at A & B, approx of 70-100 meters height from the ground can see each others' points slightly (same size of toothpick) at the same ground levels and heights.

Here's the link between A and B

is it possible? or any solution how to make the signals between A & B successfully linkable?

Thanks..
  0      
  0      
#1
Options
3 Reply
Re:Signal Strength between CPE510 & WA901ND at 5km?
2015-07-03 17:42:15

MarHazK wrote

CPE510 & TL-WA901ND v3.1 with 2.5Ghz 24dbi
any solution

Of course, redesign which ever you want of the two, either redesign 510 to be a 2.4Ghz or redesign 901 to be a 5Ghz, do your pick.
And do your Math

subir fotos online

subir foto
  0  
  0  
#2
Options
Re:Signal Strength between CPE510 & WA901ND at 5km?
2015-07-06 03:02:55

danymarc wrote

Of course, redesign which ever you want of the two, either redesign 510 to be a 2.4Ghz or redesign 901 to be a 5Ghz, do your pick.
And do your Math

subir fotos online

subir foto


i forgot that both devices are not the same freq (which 2.4ghz only connect 2.4ghz devices, 5ghz only connect 5ghz devices)..
  0  
  0  
#3
Options
Re:Signal Strength between CPE510 & WA901ND at 5km?
2015-07-06 05:57:23
The only CPEs I have seen double band are Mikrotik
But I don't know if they can work dual at the same time
  0  
  0  
#4
Options