VLAN with Engenius Wifi and SG2216
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VLAN with Engenius Wifi and SG2216
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hello! Thanks for taking the time to read and possibly provide some help!
First time trying to configure a TPLINK for VLAN, and having some issues.
What am I doing wrong? Only trying to get VLAN100 to work right now (then I'll add another VLAN, but trying to get 1 to work before adding a 2nd) Thanks again!
Hardware Version : Not Clear
Firmware Version :
ISP :
Hello! Thanks for taking the time to read and possibly provide some help!
First time trying to configure a TPLINK for VLAN, and having some issues.
| TL-SG2216 2.0 Firmware: 1.0.3 Build 20150714 Rel.61832(s) Setup: Switch connected to router on Port2 (untagged) AP (ENS202EXT) on Port 8 (tagged) VLAN SSID2 for AP is TestVlan2 and is configured for VLAN100 No traffic, no DHCP, doesn't work on static either when connected to the AP. Screenshots of TPLINK config and Engenius config TPLINK:  AP:  [B][/B] |
What am I doing wrong? Only trying to get VLAN100 to work right now (then I'll add another VLAN, but trying to get 1 to work before adding a 2nd) Thanks again!