TL-R470T+ static route
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R470T+ static route
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hello all,
I have a problem with the router TL-R470T+ regarding static routes.
My network configuration is as follows:
TL-R470T+ WANs are connected to 3 ADSL for load balancing.
The LAN IP is 192.168.1.1/24. I have several devices in this lan 192.168.1.0/24 and all of them have correct connection to the Internet.
Other router (router B) is connected to this LAN using WAN side IP 192.168.1.200, and LAN is connected to the network 10.10.0.0/24 using normal routing (no NAT is performed). Gateway for router B is 192.168.1.1.
In order to configure this route I added the following static route in the TL-R470T+:
Destination: 10.10.0.0
Subnet: 255.255.255.0
Next Hop: 192.168.1.200
Interface: LAN (i also tried WAN1, WAN2, WAN3 and all together)
The problem is that devices 10.10.0.0/24 can't access the Internet.
Is something wrong with this configuration?
Thank you
Hardware Version : Not Clear
Firmware Version :
ISP :
Hello all,
I have a problem with the router TL-R470T+ regarding static routes.
My network configuration is as follows:
TL-R470T+ WANs are connected to 3 ADSL for load balancing.
The LAN IP is 192.168.1.1/24. I have several devices in this lan 192.168.1.0/24 and all of them have correct connection to the Internet.
Other router (router B) is connected to this LAN using WAN side IP 192.168.1.200, and LAN is connected to the network 10.10.0.0/24 using normal routing (no NAT is performed). Gateway for router B is 192.168.1.1.
In order to configure this route I added the following static route in the TL-R470T+:
Destination: 10.10.0.0
Subnet: 255.255.255.0
Next Hop: 192.168.1.200
Interface: LAN (i also tried WAN1, WAN2, WAN3 and all together)
The problem is that devices 10.10.0.0/24 can't access the Internet.
Is something wrong with this configuration?
Thank you
