Reset TL-WA5210G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Reset TL-WA5210G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Reset TL-WA5210G
Reset TL-WA5210G
2016-02-02 13:34:02
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

PN : tl-wa5210g v1
DP : 2012

hi tp link forum,
a few days ago I tried to upgrade the firmware tl-WA5210G v1. but there is a problem on my lan cable suddenly disconnected. then the electricity in my house dead. when I try to switch on the lights only power that flame and I could not access my tl-WA5210G. I tried to reset but no results.


The TL-WA5210G whether I have really broken? What could possibly be improved. sorry about the English language. I am using google translate
  0      
  0      
#1
Options
6 Reply
Re:Reset TL-WA5210G
2016-02-02 21:31:27

vivadita wrote

my lan cable suddenly disconnected. then the electricity in my house dead

Your 5210 is bricked
  0  
  0  
#2
Options
Re:Reset TL-WA5210G
2016-02-14 10:28:23
Try to use another cable to access the unit.
Anyway, it's at high risk that the device is broken if the power supply is off during upgrading.
  0  
  0  
#3
Options
Re:Reset TL-WA5210G
2016-02-16 16:49:57

danymarc wrote

Your 5210 is bricked


maybe right. you know how to unbrick?
  0  
  0  
#4
Options
Re:Reset TL-WA5210G
2016-02-16 17:06:48

stupidbird wrote

Try to use another cable to access the unit.
Anyway, it's at high risk that the device is broken if the power supply is off during upgrading.


I did
a few days ago. someone turn it into a wireless UBNT. and can be used.
  0  
  0  
#5
Options
Re:Reset TL-WA5210G
2016-02-16 20:32:18

vivadita wrote

I did a few days ago. someone turn it into a wireless UBNT. and can be used.

If the issue started when you where flashing to UBNT, then you opened the thread not posting the whole truth, you used the word upgrade, yours was a firmware change to UBNT, if you had posted the truth from day one, I had told you it has a recovery mode in cases like yours.
  0  
  0  
#6
Options
Re:Reset TL-WA5210G
2016-02-17 12:06:21

danymarc wrote

If the issue started when you where flashing to UBNT, then you opened the thread not posting the whole truth, you used the word upgrade, yours was a firmware change to UBNT, if you had posted the truth from day one, I had told you it has a recovery mode in cases like yours.


it's true .. when WA5210G rejected from my distributor. someone able to change it and I paid for his services. now he change it back to the original tplink
sorry, because I'm confused
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 2562

Replies: 6

Related Articles