Provisioning eap110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Provisioning eap110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Provisioning eap110
Provisioning eap110
2016-02-03 19:23:29
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

A month ago i bought 2 eap110. I try to set them up in a small rooms to let. The topology goes via ethernet and it goes: router to pc, router to switch , switch to eap's. All things goes perfect. But i have an issue. When im trying to adopt the first eap i get a status of provisioning and never goes to connected. The controler in the upper menu indicates 1 connected device but when i go to the sub menu the status is provisioning!!! As long this status remains in provisioning mode i cannot make a new wireless conection. Another thing is when i open the controler i cannot find my eap wireless. When i shut down the controler wi fi of eap works perfect.Any ideas??Please help.EgSorry about my English but im Greek.Thank you!
  0      
  0      
#1
Options
4 Reply
Re:Provisioning eap110
2016-02-04 16:54:23
You need to check whether the firmware of your EAP110 and Controller are the latest. Here: http://www.tp-link.com/en/download/EAP110.html#Firmware.
Do you make your EAP work in static IP? You could change it to the dynamic IP and maybe it would be faster than static IP status. If you still can't make it work, you could reset the EAP devices and adopt it again. After adopt, wait for a moment, you could reflesh it at the top right corner.
  0  
  0  
#2
Options
Re:Provisioning eap110
2016-02-05 01:43:20
Thanks to quick answer johnson. My firmware is the latest. I've tried both dynamic and static ip the problem remain. I've made up to here a bilion of resets but still the same. Thanks to you and Eva liu from the support team of tp link i find the solution.!!! The problem was with the controler. If you use the latest firmware of the eap and the controler version 1.0.1 it doesnt work I dont know why!!!! When i install the 2.2.3 controler all was perfect. Im still confused why 1.0.1 doesnt work but thanks to all of you i solve my problem. Thank you. :)
  0  
  0  
#3
Options
same problem
2017-12-31 04:40:50
this is happening to me also.
What is the solution?
  0  
  0  
#4
Options
Re:Provisioning eap110
2018-01-02 11:14:02
Can you tell us more details about the network layout and the specific problems instead of saying this is happening to me also?

What's the firmware version of your EAP Controller and EAPs?
The latest firmware for EAP Controller should be EAP Controller_V2.5.4_Windowsand EAP Controller_V2.5.3_linux, please upgrade it if your EAP Controller is not the latest.
Please also go to the webslite to download and upgrade the latest firmware for EAP110 at
[COLOR=#333333] http://www.tp-link.com/en/download/EAP110_V1.html#Firmware
  0  
  0  
#5
Options