TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers
Model :
Hardware Version :
Firmware Version :
ISP :
Hi All,
TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers
We have 14 active WAN IP addresses (32 total) and 43 active LAN IP addresses (8 physical, 35 Virtual servers, ~150 max needed). Need to forward the same ports based on the destination WAN IP address to specific LAN IP addresses. Some WAN IP's send different ports to many different LAN servers, some WAN IP's map to one LAN IP, plus some of the ports need to be "translated" to other ports.
So depending on which WAN IP address port 80 is destined for determines which LAN IP address it sends it to. Currently port 80 is used on 11 different WAN IP's.
Oh, don't care which WAN connection it comes in on since it always needs to get to the correct server.
Can this be do with these routers and if so, can you please point me to the docs?
TIA,
WIN286
Hardware Version :
Firmware Version :
ISP :
Hi All,
TL-ER6120 / TL-ER6020 Forwarding Same TCP/UDP Port to Different Servers
We have 14 active WAN IP addresses (32 total) and 43 active LAN IP addresses (8 physical, 35 Virtual servers, ~150 max needed). Need to forward the same ports based on the destination WAN IP address to specific LAN IP addresses. Some WAN IP's send different ports to many different LAN servers, some WAN IP's map to one LAN IP, plus some of the ports need to be "translated" to other ports.
So depending on which WAN IP address port 80 is destined for determines which LAN IP address it sends it to. Currently port 80 is used on 11 different WAN IP's.
Oh, don't care which WAN connection it comes in on since it always needs to get to the correct server.
Can this be do with these routers and if so, can you please point me to the docs?
TIA,
WIN286
