Port forwarding TL-ER6020 V2 router
Hardware Version :
Firmware Version :
ISP :
Hello,
I need help for port forwarding:
I need to do port forwarding for example source IP x.x.x.x (it's client IP o other network) connecting to my WAN IP a.a.a.a:3390 and redirecting to LAN IP b.b.b.b RDP 3389 port. It's port forward 3390->3389.
I can do it by virtual servers, but there isn't source IP i want that this port forward can use only specific client IP.
So what to use maybe Transmission->Routing->Policy routing ?
Thank you
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
I have the same issue. Do you have any hint?
- Copy Link
- Report Inappropriate Content
alainb wrote
Hi,
I have the same issue. Do you have any hint?
If you mean that you need to allow the special IP address to be able to access your server in LAN, you can use virtual server and access control function to meet the requirement.
- Copy Link
- Report Inappropriate Content
Hi
I have a similar problem.
I have followed the steps in https://www.tp-link.com/en/faq-2026.html Very useful, some item were diffrent menu locations,.
But I failed to get it to work.
Is there a way of getting Logs for debugging?
I looked at the logs (all levels) but the is no entry when i test the port forwarding.
Is the reqest not geting there, or is port forwarding not logged?
Is ther another How to for my exact version?
I have:
TL-ER6020 v2.0 2.0.2 Build 20180702 Rel.59031
- Copy Link
- Report Inappropriate Content
tim3 wrote
Hi
I have a similar problem.
I have followed the steps in https://www.tp-link.com/en/faq-2026.html Very useful, some item were diffrent menu locations,.
But I failed to get it to work.
Is there a way of getting Logs for debugging?
I looked at the logs (all levels) but the is no entry when i test the port forwarding.
Is the reqest not geting there, or is port forwarding not logged?
Is ther another How to for my exact version?
I have:
TL-ER6020 v2.0 2.0.2 Build 20180702 Rel.59031
Hi tim3
You can disable the Access Contrl rule temporarily. Then try to access your server. Make sure that your port forwarding is working normally at first then enable Access Control rule.
If you don't mind, also can post the screenshot of your router's settings. Then we can help to check together.
- Copy Link
- Report Inappropriate Content
Hi
thanks for your help
I am trying to forward port 145 from any WAN to LAN 192.168.2.2 I and using a non standard port, but it worked for years untill i put in the ER6020 router.
setup server type Sserve TCP 145
SetUp Server IP
Setup IP groups server and clinets
and last the firewall.
any helps sugestion apresheated.
Cheers
Tim G
- Copy Link
- Report Inappropriate Content
Please note that you still need to set up the Virtual Server. Just need to set up the external port(145-145) and internal port(145-145) and IP address (192.168.2.2), and choose WAN port.
- Copy Link
- Report Inappropriate Content
Hardware Version: TL-ER6020 v2.0
Firmware Version: 2.0.2 Build 20180702 Rel.59031
Hello,
Is there a problem with the TL-ER6020 V2 router regarding NAT?
It is impossible to forward a port to a server in the LAN!
I have an R600 VPN V4 router and it works directly!
Why doesn't it work with the TL-ER6020 V2?
I would like to be able to access from the WAN to the LAN on ports 22, 80 and 443!
I followed several ways of doing it on the Forum and the examples in the manual but it is impossible to function.
I do have a public address, not a private one.
Port Wan1 is activated and the others operate in LAN mode.
In the Transmission -> NAT -> Virtuals Servers section: ports 22, 80 and 443 are open on the TL-ER6020
Could you please provide me with the procedure to operate port forwarding?
Thank you.
Yours.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 9484
Replies: 9
Voters 0
No one has voted for it yet.