Model :

Hardware Version : T2600G-28TS 1.0

Firmware Version : 1.0.1 Build 20160412 Rel.57988(s)

ISP : Note relevant i supose... :)


Hi,

I have been cracking my head on a weird situation. Currently i have TL-SG3424 with 2 ports in LACP/LAG with an Juniper EX4200 working fine. Now the replacement T2600G-28TS is having issues. When enabling static or dynamig a LAG LACP on the ports the links instantly go down. There in the log nothing to see, only that i've created LACP on the ports. I've played with the last 3 firmware versions and that doesn't change anything. The Junipers i cannot change, in their log the only info shows that the ports are down. Also been playing with the hash, but nothing... When LACP is active the port instantly goes down.

The config i need to have is 2 ports in fullduplex 100mbit, with 2 vlans.

The active config rules are :
port-channel load-balance src-dst-ip
#
interface gigabitEthernet 1/0/23
speed 100
duplex full
switchport mode trunk
switchport trunk allowed vlan 416,427
channel-group 8 mode active
#
interface gigabitEthernet 1/0/24
speed 100
duplex full
switchport mode trunk
switchport trunk allowed vlan 416,427
channel-group 8 mode active



What is going on here...? Also i've been playing with making the config via webbased or telnet... no change... And if i copy the same config rules from the SG3424 it doesn't work.

Anyone an idea...? How to debug this...? The debugging enable from telnet doesn't bring any extra info...?

Thanks,
Michiel