Business Community > All Threads > EAP 220 Ethernet Problem
< All Threads

EAP 220 Ethernet Problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP 220 Ethernet Problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP 220 Ethernet Problem
EAP 220 Ethernet Problem
2017-04-30 19:51:48
Model :

Hardware Version :

Firmware Version :

ISP :

I was expecting to use the console port as ethernet port, but is not working.

By the way, I connected internet port to my router and WiFi is working properly, but I connected my Smart TV to console port and it is not working.

I colcuded that either my device is broken or console port is not a regular ethernet to disrtribute internet via cable.

Thank you for your help to clarify it.
  0      
 
  0      
 
#1
Options
4 Reply
Re:EAP 220 Ethernet Problem
2017-04-30 23:49:53
Did you Read The Fine Manual? Cited from the EAP220 User's Guide:

CONSOLE: This port is used to connect to the serial port of a computer or a terminal to check and monitor system information of the EAP120/EAP220.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:EAP 220 Ethernet Problem
2017-05-01 15:20:14
Yest, thank you. it's not clear to me what is the purpose of this port. When I connect it, my PC/laptop is not able to feel it.
  0  
  0  
#3
Options
Re:EAP 220 Ethernet Problem
2017-05-01 19:19:06

dankan1972 wrote

Yest, thank you. it's not clear to me what is the purpose of this port. When I connect it, my PC/laptop is not able to feel it.


A serial port is a RS232C interface, which allows you to manage the EAP even if the network has become totally unusable due to mis-configuration (e.g. b/c you changed some network settings which prevents you from accessing the EAP's UI over Ethernet anymore). You usually would use the command line interface (CLI) to repair such settings, but in current firmware there is no CLI (yet), so this port is currently useless at all until TP-Link releases a CLI for the EAP.

If a CLI has been released eventually, you would need a terminal emulator to access it through the serial port from your PC such as PuTTY / zmodem / whatever on Windows or cu (call unix) on Linux and MacOS.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re:EAP 220 Ethernet Problem
2017-05-03 05:17:00

R1D2 wrote

A serial port is a RS232C interface, which allows you to manage the EAP even if the network has become totally unusable due to mis-configuration (e.g. b/c you changed some network settings which prevents you from accessing the EAP's UI over Ethernet anymore). You usually would use the command line interface (CLI) to repair such settings, but in current firmware there is no CLI (yet), so this port is currently useless at all until TP-Link releases a CLI for the EAP.

If a CLI has been released eventually, you would need a terminal emulator to access it through the serial port from your PC such as PuTTY / zmodem / whatever on Windows or cu (call unix) on Linux and MacOS.


Thank you perfectly clear to me now.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 990

Replies: 4

Related Articles
EAP 220 Speeds
687 0
EAP 220 Cluster
1213 0
EAP 220 Cluster
868 0
EAP 220 not showing up in controller
1700 0
EAP-220 losing internet
1199 0
tp link eap 220
588 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.