Web interface access after configuring VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Web interface access after configuring VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Web interface access after configuring VLAN
Web interface access after configuring VLAN
2017-07-06 17:29:59
Model :

Hardware Version :

Firmware Version :

ISP :

Hi
I've followed following steps to make VLAN on my smart switch, the way I setup 2 VLAN on 2 ports and one trunk port, but once I've created this I have not able to access the smart switch web interface, router assign (DHCP) IPs for the 2 networks, I couldn't find switch IP assigned to switch to access the web interface.
Anyone can help ?
(I can access web GUI changing IP on PC to 192.168.0.10 (switch default network) and connect to another port on the switch (not VLAN port) but this is not I need)
  0      
  0      
#1
Options
2 Reply
Re:Web interface access after configuring VLAN
2017-07-07 23:24:45
Then why don't you put the switch into the VLAN you want it to have by assigning a fixed IP from the appropriate subnet? I don't understand what's the problem doing so. If you want the switch to respond to a certain IP, you need to assign it this IP!
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:Web interface access after configuring VLAN
2017-10-30 06:19:26
Sounds like the Management VLAN setting on the switch may need to be changed to match the VLAN ID for whatever port you are using to connect to it.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1841

Replies: 2

Related Articles