Business Community > All Threads > CPE510 to IP camera connection problem
< All Threads

CPE510 to IP camera connection problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE510 to IP camera connection problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE510 to IP camera connection problem
CPE510 to IP camera connection problem
2017-08-19 22:47:55
Model :

Hardware Version :

Firmware Version :

ISP :

Hi, im having a problem to connet my IP camera with 2 CPE510 and i dont know whats the problem.


Current setup:
IP Camera 192.168.0.101 > CPE510 Client 192.168.0.106 --------- CPE 510 AP 192.168.0.107 > Computer
when im running with cable from AP i cant connect to client or IP Camera but when i connect with wifi to the AP i get access to them both. no faulty cables

I have also tried following setup without any progress
IP Camera 192.168.0.101> Client 192.168.0.106 ------- AP 192.168.0.107 > Router 192.168.0.1 ( IP range 100-199) > NVR 192.168.0.108
  0      
 
  0      
 
#1
Options
3 Reply
CPE510 connection problem to IP Camera
2017-08-20 04:01:59
Model :

Hardware Version :

Firmware Version :

ISP :

Hi, i have problem to connect my IP camera using 2 CPE 510's and i dont know whats the problem. I have tested to place the AP and client 30m away and with line of sight. I have been trying different solution whitout no sucess. All IP adress set to static.
.
I have tried following setup

IP Cam 192.168.0.101 > Client 192.168.0.106 > -------- < AP 192.168.0.107 < Computer

I have also tried to connect it to the NVR

IP Cam 192.168.0.101 > Client 192.168.0.106 > ------- < AP 192.168.0.107 < Router 192.168.0.1 (IP range 100-199) < NVR 192.168.0.108
  0  
  0  
#2
Options
Re:CPE510 to IP camera connection problem
2017-09-01 11:20:48
Is your computer connected to the LAN1 of CPE510 or the second LAN port of PoE adapter? Besides, make sure your CPE510 is working on AP mode, other than AP router mode.
If so, your computer should be able to access the client and IP camera theoretically, if still not available, please try to ping the AP from your computer , see whether it's access able or not at first.
  1  
  1  
#3
Options
Re:CPE510 connection problem to IP Camera
2019-07-13 18:07:06

Zoidberg wrote

Model :

Hardware Version :

Firmware Version :

ISP :

Hi, i have problem to connect my IP camera using 2 CPE 510's and i dont know whats the problem. I have tested to place the AP and client 30m away and with line of sight. I have been trying different solution whitout no sucess. All IP adress set to static.
.
I have tried following setup

IP Cam 192.168.0.101 > Client 192.168.0.106 > -------- < AP 192.168.0.107 < Computer

I have also tried to connect it to the NVR

IP Cam 192.168.0.101 > Client 192.168.0.106 > ------- < AP 192.168.0.107 < Router 192.168.0.1 (IP range 100-199) < NVR 192.168.0.108

 

Hi, i know this thread is quite old but i am having the same problem using the cpe210. Were u able to finally figure it out?

 

Best Regards

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 2816

Replies: 3

Related Articles
CPE510 to IP camera connection problem
493 0
IP subnet on LAN1 connection CPE510
1688 0
cpe510 point to point problem
1529 0
Cpe510 problem
919 0
CPE510 Point to Multi Point ip camera to nvr
812 0
CPE510 Client to Deco M5 connection problem
854 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.