ColleLupiLV1Online
Following: 0Followers: 0
Forums/ Controllers
2023-09-01 13:27:00
Re:No connection of the wifi networks with VLAN after access point change
@ColleLupi Thank you for your interest. EAPs work perfectly with the older ones from TPlink. VPNs are marked. There are five networks with five VLANs. Only when the AP pioneer (A) is changed to...
0HELPFULS
Forums/ Controllers
2023-08-30 12:09:54
No connection of the wifi networks with VLAN after access point change
No connection of the wifi networks with VLAN after access point change. A complete network of 10 houses works amazingly well so far via Omada 200 ER7206, Switch SG-3100. WBS510 antennas are still...
0HELPFULS
Forums/ WiFi
2023-07-11 09:01:38
Re:Connection only via mesh after firmware update
Yes do it. For people with less knowledge, such a problem drives them crazy.
0HELPFULS
Forums/ WiFi
2023-07-11 08:59:42
Re:Connection only via mesh after firmware update
Thank you very much. With the firmware 1.1.3 the up/download went. Now the speed is correct again. Is it possible to switch off this "rolling up"?Greetings Stefan
0HELPFULS
Forums/ WiFi
2023-07-10 14:13:30
Connection only via mesh after firmware update
Via Omada, 3 EAP610-Outdoor are controlled among many other devices. With firmware 1.0.4, everything ran perfectly. Omada provided an automatic update to 1.2.0. Unfortunately, I triggered it via...
0HELPFULS
Forums/ Controllers
2022-12-16 09:28:41
Re:How switch WiFi 6-Ghz via Omada OC 200 to the devices like EAP-610 EAP 620 HD
@ColleLupi finally understood the difference between WiFi6 and WiFi6E after much reading. Marketing is everything. How to convey that to customers now, why they bought the overpriced devices, is a...
0HELPFULS
12