Forums/
Switches
2020-11-30 12:51:54
@JohanV The IP address of the switch is static set to the same subnet as my LAN (192.68.0.2/24).
0HELPFULS
Forums/
Switches
2020-11-26 08:58:14
Hi @Fae Here the config file of the switch (username and password = admin /admin2). I have port 1 till 7 in VLAN 2. see also picture below. Config has been attach as well with admin/admin2 as...
0HELPFULS
Forums/
Switches
2020-11-26 07:42:32
Hi @Fae , I do have fiber to the home, this Ethernet does also carries VLAN ID 4 for IPTV and I want to split VLAN ID 4 from the WAN side and only send the internet to the WAN side of the router. I...
0HELPFULS
Forums/
Switches
2020-11-24 19:50:52
I have the setup as specified in the picture below: As Soon as I connect Port 1 to the ISP I cannot manage the switch, the TP-link easy smart configuration tool does not even detect the witch. I used...
0HELPFULS
Forums/
Switches
2020-11-23 12:30:59
I have fiber to the home. The ISP Ethernet carries IPTV on VLAN ID 4 and Internet. I configured the Switch as follows: Port 1 : VLAN ID 2 (untagged) Connected to : Internet Service Provider VLAN ID 4...
0HELPFULS
Forums/
Switches
2020-11-23 09:56:38
Issue was resolved by disable the IGMP Snooping.
0HELPFULS