Thanks Virgo and shberge, Don't know why i missed that line. Realy ..... of me. Upgrade whent fine. Both Thanks in advanced.

Hi, Using OC200 / 4.4.4 When try to upgrade the switch to version V1_1.0.2_20210806 it fails and says , its a invalid file. Also running TR-605 and 3x EAP245, no issues to upgrade to the latest...

@Toppy If i follow those steps " Network with an Omada Managed Router as the Gateway" I only using a local OC200 (no cloud connection) the devices (Switch and a AP) are getting the disconnected...

@Fae Thanks i will try and test it again, i had follow the configuration in the link you send me. Regards,

Hi, Using a OC200 controller with a TL-R605 & TL-SG2210MP hardware. When adopt the EAP245 it will connect in the controller software. Port 8 is connected to the OC200, Port Lan of the TL-R605 is...

@Philbert Thanks for your reply, yes your right. In my case all the hardware was new out of the box (no dhcp servers) and to see wich ip addres the controller was given from the routers dhcp pool, i...