Team, I'm using several switches of the model TL-SG2008P v1.0 and TL-SG2210P v3.20. The SG2008P's have firmware level 1.0.9, and the SG2210P's have firmware 3.20.10. On the SG2008P I have visibility...

@Hank21 Just finished a series of tests with the EAP650-Wall (replacing the EAP230-Wall). What I noticed is that the WiFi dropped packets percentage of the EAP230-Wall is more or less equal to the...

@Hank21 I just finished a few performance tests comparing the EAP230-Wall with the EAP245. In terms of throughput: the EAP230-Wall runs in the range of 190-210 Mbps. While the EAP245 runs in the...

@Hank21 - I upgraded the firmware - no real improvements (see attached screenshots): - still a significant # of retries (compared to the EAP450) - still a lot of packet drops => a few 1000 every 5...

@d0ugmac1 Thank you for the quick response! If it where just these orange area's then yes - I would agree. But there is more - the most questionable one is that the EAP is not seen in the top...

Team, I have some strange, yet serious issues with this EAP235. Long story short: it looks as if the management part is not active (or partially). In addition, if clients are connected, the...