@pesos Similar issue, check this: https://community.tp-link.com/en/business/forum/topic/559150

@georgmu By default, the switch will default to an IP address of 192.168.0.1 if it can't get an IP address from the front end properly. The problem is most likely a problem with the DHCP Server in...

@condor106 I think your idea is good. 2 CPE plus EAP-outdoor can achieve your needs. The topology should be Router----AP CPE)))(((Client CPE---- EAP-outdoor ))))((((( Clients Take a look:...

@msb1 No, switch ACL can not active when you don't have an Omada switch.

@pjangeles I have also upgraded the controller to 5.6.4 and have not encountered this problem. Have you tried reconfiguring it and testing again?

@jxis Firstly make sure the EAP is powered up, secondly press and hold the reset button on the EAP for more than 15 seconds, if you still do not see a change in the light, suspect a hardware problem...