@orfenegro The gateway IP is 192.168.1.X, but the switch's IP is 192.168.0.X and 12.168.10.x, they are in the different subnet, can not communicate with each other, suggest you keep the default...

@Andrew_E. Maybe VIGI C400HP does support SD card. However, when logging into the TP-Link ID, you can only configure the SD card recording option, so the screen you are looking at is greyed out for...

@DrLDH Did you set the POE Schedule for the switch? Can a reboot of the switch or EAP fix it? Can you reproduce the problem consistently? If so, can you describe the steps to reproduce the problem, I...

@shahsaad It looks like the settings are fine, maybe the gateway doesn't issue this configuration? If you set up an IP group for just one IP address outside the DHCP address pool alone, then set up...

@vsk1 As far as I know, ER605 is not currently supported, ER7206 can be set up in standalone mode like this, see this： How to implement VLAN unidirectional access through ACL configuration The good...

@BartD. Are there any real instability problems with these two switches in practice, after upgrading the firmware? If the switches are unstable, can you describe the exact problem phenomenon? Have...