@gimley Here is a reset hole on the EAP itself, and take off the cover, you will see it beside the Ethernet port. Use a pin to press it more than 8 sec. IF you see the light changes, then you did...

@gimley You can try resetting the EAP firstly, and test again. If still no help, set a static IP on the PC like 192.168.0.200, then connect the PC----EAP, use the default IP of EAP 192.168.0.254 to...

@samueilliam I have the EAP225-outdoor devices and work properly. Each EAP's wifi coverage radius is 100m above as tplink support told. You can use several EAPs to set the Mesh, but the first one...

@kablammy As far as I know, there should be no way to achieve this. However, it is said that OpenVPN is going to support the ability of the Client side to enter account, so we can look forward to...

@anton90125 Your question might be answered a little more accurately by consulting the local retailer.

@Stuckeymaxx It does not appear to work this way. CPE needs to be configured before it can be used and the operating mode needs to be selected.