@pcb1962 It may just showing wrong, as you said, the controller mode can not change the half/full or auto. You can try to re-adopt it. Or use the router in Standalone mode to see if it also shows...

@BobHookway There should be little interference, just need to put the corresponding CPE within the respective antenna angle, and then a clear view between CPE should be able to.

@hwms Did you use the original POE injector? If so, try different ethernet cables, change another socket, still no lights, try to reset. There is the reset hole on the POE injector, press it until...

@NeoCZ In my opinion, it can not be set, because the address reservation function is for DHCP, but the VPN client is from the VPN IP pool to get IP, the mechanism is not the same.

@LemmingNZ Looks like it's bricked, are you managing the EAP with the OC200? Is the firmware version automatically upgraded by OC200? Did you notice any power failure or disconnection during the...

@afphinfan EAP's wireless bridging has another name, called Mesh, if you do not need EAP for wireless connection in your network, then you can disable the Mesh. And make sure your EAPs are wired to...