@Hawkmire It is recommended that you can add an Omada Gateway and just use this modem on the front end as bridge mode, in which case the Gateway can be managed by the Controller. And in this way, it...

@S-K As far as I know, the settings you want are not yet supported in Controller mode, but setting LAN-LAN ACLs is supported in Standalone mode.

@creedx As far as I know, the EAP225 outdoor can handle 60-80 clents. So maybe you can test it after ramp up the bandwith lol.

@mattmaestro You just need to make the same VLAN settings on the switch, noting that the port on this switch that is down-linked to the EAP is set to tagged and the down-linked device that cannot...

@Felix81 As far as I know, there is no way to change more settings on the controller in relation to online detection Except you mentioned. One thing I'm curious about is why this would need to be...

@creedx In my opinion, QoS is generally OK by keeping the default settings. This problem is most likely caused by the lack of bandwidth on your network, and the latency will be high when there are...