@Sverhoev In my opinion, resetting the OC200 will not affect other devices in your network, except if you connect the EAP to the OC200 port. Remember to back up the settings file before resetting,...

@skavan Hi, Maybe this article will help you: https://www.tp-link.com/en/support/faq/2133/

@Hydros If you enable DPD, it will automatically detect disconnection and reconnection. Hydros wrote And what about this solution: I create multiple Vlans at both ends. Then setup VPN tunnels between...

@KS10 Is there another NAT device on the front of your ER605? Is the WAN IP of your ER605 a public IP? Here is an article you can refer to: https://www.tp-link.com/en/support/faq/3026/...

@SirDudert Based on your description, I think if you change the IP address of this ER605 to 192.168.1.0 as well, then there will be an IP conflict because the C9 in your previous section also has...

@Pixpix It's my problem, I didn't make myself clear. In fact, VLAN and VLAN Interface are not the same. If you set up a VLAN, there is no way to communicate between different VLANs. But the VLAN...