I'm seeing very high packet loss on both my eap225s on 5GHz, while at the same time both my eap245s have very little loss. Rx Dropped Packets: 10 Rx Errors: 541804 Tx Packets: 182646339 Tx Dropped...

I only see 20MHz as selectable channels in Omada, at the moment channel width is set to Auto. Does this mean the EAP will automatically bond 20HMz channels as needed? If i set channel width to 40HMz...

@bkilgore Yep, I was able to flash US firmware with the tftp method. Make sure you are flashing the same version or higher.

@gp78 Mine also had CA firmware and could not downgrade or upgrade to US firmware. I double checked to make sure mine said US on back of the EAP then flashed with US firmware using the TFTP recovery...

What is the best way to setup different SSIDs on different EAPs, at the moment I'm using WLAN groups. I have two EAPs and setup each one to a WLAN group, EAP1 is closet to some fixed light switches...

I have this weird behavior that out of my 2 EAPs, one of them just doesn't discover chromecast devices consistently while the other is perfectly fine. They are all wired to the same switch and it is...