quigley0908LV1Offline
Following: 0Followers: 0
Forums/ Routers
2015-05-15 03:17:28
If the VPN is connected
If the VPN says you are connected...then you are connected. When you put in your local and remote IP's did you use a range 192.168.1.0/24 or did you do a specific IP? Also check your AV software. A...
0HELPFULS
Forums/ Routers
2015-05-15 03:03:24
Not sure where you are putting those settings but...
KWheelerAZ wrote Region : UnitedStates Here are the settings: Incoming = WAN Address = ALL Outgoing = LAN Address = 10.x.x.7 Start Port = 3389 End Port = 3389 TIA. I am not sure where you are pulling...
0HELPFULS
Forums/ Routers
2015-05-15 02:52:31
IPsec over NAT-T not working properly
Region : UnitedStates Model : TL-ER604W Hardware Version : V1 Firmware Version : 1.1.0 Build 20141031 Rel.32628s ISP : Comcast So I actually have a few questions. So my main router that I have 19...
0HELPFULS