mbze430 wrote @Hank21 In the guide iin both section of the guide, 4. Reconnect the controller to switch A through port 4 (the idle port configured in step 2). 5. Reconnect the controller to switch A...

Hi @mbze430 Is there a way to configure the management via CLI? Here is the CLI command guide for your reference. When you enable Management VLAN on the interface does it turn the packet to QinQ? No,...

Hi @Medster87 Do you have any other devices that support mesh from other manufacturer? Will you encounter the same issue when you wired connect to the router? If you would rather, you may consider...

Oliv2831 wrote Hello, I'm thinking about the following process to control WiFi devices in a PPSK environment without Radius. My ultimate goal is to keep user from passing PSK to each other but...

Lodi123 wrote @d0ugmac1 how to fix this? Hi @Lodi123 This notice only affects the URL after login. You can log in and save the new URL.

mixman68 wrote Hello @Hank21 are you sure of this ? my iPhone is connected on 2.4Ghz in WPA3 I checked with my thinkpad and it is the same uncheck the 802.11r has solved my issue but increased...