Hello @Justin35, Before we log in the management page of the CPE, please make sure that the PC has already set up the static IP address just like 192.168.0.x, you can refer to this article. 1. Please...

Hi @patchman, Thanks for all testing you tried! The result of Iperf tests proves all EAPs are working properly at least, the issue seems like occur on the front-end device, it is suggested to contact...

Hello @WM1, WM1 wrote The MAC addresses seem to be related to the MAC addresses of the EAP615-Wall access points. What do you mean the MAC address related of the EAP615-Wall? Could you take an...

Hello @UserUser, UserUser wrote - Can i adopt on the OC300 the EAP if they are not plugged via ethernet ? No, EAP110-Outdoor doesn't support Mesh, you can only adopted them when they are wired...

Hello @Hans1234, Thank you for taking the time to report the issue to our community! May I know how many clients connect to this EAP653 totally in your entire network? Did this issue happen both on...

Hello @patchman, Thanks for posting this issue to TP-Link Business community! Please use the 1m short cable connect EAP670 for testing. It is suggested to use the Iperf test tool to do the speedtest,...