Hi @9hK6naC Please check your switch and EAP are on newest firmware, and have mDNS enabled on the controller; Since you can ping and detect the printer through the VLAN, it should be related to your...

Hi @Addy28 ER605 is a pure NAT router. It does not support classic routing. One-to-one NAT may be a solution, but that may still requires you to change something on your Firewall. How to configure...

Hi @YuukiA Yes that is a public IP in this example. If you do not have static IP from ISP, you can purchase DDNS service, and put in URL as the Controller IP.

Hi @MrHC1983 Please wait for our next firmware updating. For current version please use Omada APP to delete the log.

Hi @Rich1000 When you choose the LAN port on LAN interface, that means the router will send this VLAN tagged data to this port. VLAN configurations of the LAN ports on Omada Gateway in Controller mode

Hi @Rich1000 May I know the firmware of your ER605? I can create two OpenVPN policy for one WAN port. Just need to change the service port to a different one like 1193. (default is 1194)