@sbs22 Have you got any Omada APs? It refers to an access point that works with the Omada controller and can be managed by it. Only the Access Point connected to the Omada Controller will apply the...

@Viche How do you pre-configure the controller's settings? Normally, once you connect the gateway to the controller, the gateway will apply the settings you made on the controller ever since. Also,...

@Bolczerw First, go to Wireless Networks->WLAN and set up a new WLAN group. Then navigate to Device, click on it, and wait for the window to appear. Go to Config-WLANs and select the group for it:

@madof Note that if you are using Omada Controller on Linux, avoid using port 443, because non-root users are not allowed to run services on this port, which will cause the controller to fail to...

@wuppi If this problem still exists? I guess there do not have this issue now? This issue does not occur often, right? And this issue is not caused by the controller itself. It is the environment. So...

@guyd2 Yes, it only works for specific VLANs, depending on which VLAN you enable. If you want the switch to serve as the DHCP server for a specific VLAN, disable the router's DHCP server in that...