@Artur.Aragao ah, thats actually a different problem then. Rate limits set higher than around 220mbit dont work, the EAP wont go any higher than 220ish when rate limit is enabled on a SSID Prohibit...

@Artur.Aragao Are you using SSID rate limits or Prohibit wifi sharing? that is a known bug with both features limiting throughput to around 220 to 250mbit

@avpopov1977 Gateway (ER8411) DHCP isnt pro-active, meaning it does not actively send out DHCP offers to clients. It is purely reactive, meaning it only respons to DHCP requests from clients. In this...

@SCMAF is .5.X the LAN side and .4.X the WAN side of the router? Are the both LAN side but different vlans? If its the first, then you just need to set up one-2-one NAT for each camera IP and give it...

I may be compltely wrong, but im sure this has been brought up before and the concensus was that with a Module, the ER8411 will connect at 1, 2.5 and 10g, but not 5 You may need a media converter as...

@Javito Only the OC400 hardware controller and Software controller (i think) can show per-user DPI data