Im not sure if its possible, but it would allow a great deal of flexibility and potentially release some room on the limited IP_Groups we can make if, like on recent Gateway firmware, we could have a...

@Babun-Sikder also put your controller IP in the "Option 138" setting of the management vlans DHCP at each site

@MacRouter If you dont have a L2+ or L3 switch capable of switch routing, you have to make the vlans as interfaces. This is perfectly normal. You can assign any vlan as native to a router port, or...

@MacRouter If you dont have a controller on the network (OC200/300/Software) you will need to log in to the EAP and create the same SSIDs and give them the correct 802.11q vlan tags and the same...

@MacRouter Wired backhaul access points isnt "mesh" and its just wired backhaul APs. Mesh is really the terms for APs linked to each other over WiFi with only certain "root nodes" having a wired...

@Vincent-TP It was hapenning all the time - however, interestingly, i took the time to go through every single wired device and using the new feature i set up the vendor, model etc, since then I...