@Vincent No, he means the actual deviuce web GUI (the one that says, for example "WEB SERVER FORBIDDEN CONTROLLER SOFTWARE RUNNING" like on switches and gateways when you go to their IP It...

Update for anyone that has this issue Seems to be some side effect of multiple FW updates over the last year or so and never being factory reset maybe?. I factory reset it using BootUtil and let it...

@Kahn1944 just whichever is the WAN port. If it makes no difference or slows it down, you can just turn it off again

@Kahn1944 Standalone Mode Network > Switch > Port Config Tab , enable it for whichever your WAN port is In controller its on the port config of the gateway device > config tab Flow control makes sure...

@Kahn1944 enable Flow Control on the WAN port. Also update the firmware to the version Clive indicated. On multi-gigabit WAN connections TP-Link routers need flow control enabled WAN side to achieve...

@Markhausen Try setting the bandwidth limit to "individual" instead of shared. If the IP group only has one entry this should still work fine to limit that client. The only thing i can think of here...