@MDowns This post was helpful in helping me isolate an iPhone connectivity problem on our business network, but wasnt quite the same situation. Some of our clients, especially on our guest SSID (with...

@A_Mansoor Things to check: Client rate limit in SSID config SSID rate limit in SSID config Transmission > Bandwidth control, have you limited that VLan ? Is the cable to the access point bad and...

@Cotchet TP klink people have confirmed in a number of threads that the SFP+ WAN port on the ER8411 cannot be disabled, ever. As a result, regardless of what settings you give it, it will always...

Looking at the datasheet, the ER7206 v2 is listed as a nat throughput of a full 1gbit wan connection. Is that PER WAN connection, so if you have 2x 1gbit WAN links, and with policy routing, it can...

@GRL Thanks, replied with requested info and logs

When setting rate limits for an SSID in controller, on 5ghz the limit per client seems to be hard limited to around 220mbit down despite the rate limit profile being set to 800mbit or any value...