Forums/
Routers
a week ago
@EricPerl You've done a lot of work, but I would leave the Guest network alone and use it only for what it has been designed for. Try something different. 1. To block Wi-Fi intra-VLAN traffic, create...
0HELPFULS
Forums/
Switches
a week ago
@Winho Are you saying that you have Zabbix on the WAN side? I have never tried that. I don't know what needs to be done to make it work that way. I run Zabbix on my LAN.
0HELPFULS
Forums/
Switches
a week ago
@Winho Have you actually connected Zabbix to those devices? If connected, even generic templates should show some data. Also, it takes some time for Zabbix to finish the device discovery process.
0HELPFULS
Forums/
Controllers
2024-04-08 13:59:51
@MaxPowers_ Looking at your CLI, I wonder how you got this.
no switchport general allowed vlan 1 no switchport turns a L2 port into a L3 port, a routed port. Routed ports are used, as the name...
0HELPFULS
Forums/
Switches
2024-04-06 23:22:56
@SasoC If the DHCP server is configured on the switch and running, you probably just need to configure the access ports correctly. Have each access port untagged in a single VLAN and its PVID set to...
1HELPFULS
Forums/
Switches
2024-04-06 23:15:54
@DalanNet I think the best practice is to have a single trunk on a LAG and control the flow with QoS, if necessary. That leads to the best use of bandwidth and provides redundancy. And, yes,...
1HELPFULS