thank you...one other quick question....If I want to access the remote 5210G's (may be more than one), should I set the IP's based on the Home Router?. In the example I have below, my Home Router and...

Region : UnitedStates Model : TL-WA5210G Hardware Version : V1 Firmware Version : 4.4.8 Build 130502 Rel.61441n ISP : Comcast I am looking to bridge a gap between two house of approximately 0.5miles....

i realize this...however, the distance i need is .5 miles...so I would like to verify proof of concept, and make sure the equipment is working correctly. This weekend I will have time to try an...

Below is the setup i'm currently testing... Internet<>WR1043ND<>WA5210G<><><>30 feet<><><><>laptop computer At times it will connect with upto 13Mb/s ( i have a 25Mb/s line)....most times no more...

Pabloirl Disable DCHP on the 5210. Let it act as an Access Point, any clients you connect to it will pull DHCP from your router. If the router is at 1992.168.1.1, set the AP at 192.168.1.2. If they...

I have manually set it to Channel 1., and also tried 6 and 11 (even though they are the most populated ones in my area). It's as though the AP is locked in at T1 speeds...not getting more than...