ringo27LV1Online
Following: 0Followers: 0
Forums/ Surveillance
2023-10-09 07:47:20
Re:Pinout diagram
@Clive_A Thanks, hope the board is intact and not fried.
0HELPFULS
Forums/ Surveillance
2023-10-07 06:19:48
Pinout diagram
Hello, Anybody have a pinout diagram for vigi camera? The connector burnt due to water damage and I'm re-crimping to a keystone. Tried above diagram from Hikvision but no success. Thanks.
0HELPFULS
Forums/ Surveillance
2022-08-04 07:53:24
Re:Motion Detection Type: Vigi NVR + C300 and C400
Hello @Virgo Looks like this would be a future feature release perhaps, thanks.
2HELPFULS
Forums/ Surveillance
2022-08-02 09:35:47
Re:Motion Detection Type: Vigi NVR + C300 and C400
Hello @Virgo, Yes, all cameras are added and operational. Human and Vehicle detection are grayed-out.
0HELPFULS
Forums/ Surveillance
2022-08-01 09:02:10
Motion Detection Type: Vigi NVR + C300 and C400
Hi All, This feature is not yet available? It's currently grayed-out on the Motion Detection, Area Intrusion and Line Crossing Under Smart Event Detection.
0HELPFULS
Forums/ Surveillance
2022-08-01 08:34:57
Re:NVR: Connected with no internet access
Gentlemen, Your subnet should be the same as PLDT's. PLDT Default is 192.168.1.x. You can use 192.168.1.2 to 254. Good luck!
1HELPFULS
12