ianmudLV1Online
Following: 0Followers: 0
Forums/ Controllers
2023-01-06 15:28:43
Re:Services ==> Uprgrade Schedule Question
@Somnus By leaving the OC200 disconnected, I mean disconnected from Omada Cloud Access. The question is whether the Services ==> Upgrade option requires the OC200 to be connected to Omada Cloud...
0HELPFULS
Forums/ Controllers
2023-01-04 05:43:41
Services ==> Uprgrade Schedule Question
While my ecosystem is bound to the Omada cloud, I prefer to leave my OC200 controller disconnected to provide an additional layer of security for my network. As I understand it, under normal...
0HELPFULS
Forums/ Controllers
2022-08-28 17:58:10
Re:Switch ACL blocking acting bidirectionally instead of just one way
@Alex789 That solved the problem. When I added the /32, the system now behaves as I was hoping. Much appreciated.
0HELPFULS
Forums/ Controllers
2022-08-28 17:31:45
Re:Switch ACL blocking acting bidirectionally instead of just one way
@Alex789 So, I have now tried to create multiple ACL switch rules to access the printer on the Household network VLAN100 (address 192.168.100.30) from MYNet VLAN104. I have tried using the MAC...
0HELPFULS
Forums/ Controllers
2022-08-17 22:20:43
Re:Switch ACL blocking acting bidirectionally instead of just one way
Thanks for the guidance. I will try this but I do have a question. I assume that sequencing is important and that I would have to include the rule allowing certain traffic acitivity (eg: allow...
0HELPFULS
Forums/ Controllers
2022-08-17 18:11:47
Switch ACL blocking acting bidirectionally instead of just one way
I have a network with 3 distinct IP Ranges. The first range I use for management, the second range I use for my families activites including wired and wireless device connections, video streamers,...
0HELPFULS