LearnTOLV2Online
Following: 1Followers: 1
Forums/ Kasa Smart Switches
2023-09-14 15:57:32
Re:Will Kasa Motion Sensor Switches (KS200M or KS220M) Work for 3-way?
@RickMeister You may be able to accomplish this using Kasa "Smart Actions" and some outside of the box thinking. Cap the load wire, so the sensor doesn't physically trigger anything.. Program a Smart...
0HELPFULS
Forums/ Kasa Smart Switches
2023-02-03 07:18:52
Re:HS 210 3-Way Switch wiring issue..
Yodasector wrote So I have installed my HS210 3 Way per the instructions but it is behaving incorrectly. If I hit the switch connected to the lamp, it will turn on and off as expected, but when I use...
0HELPFULS
Forums/ Kasa Smart Switches
2023-02-03 07:03:22
Re:Cannot get motion sensor switch (KS200M) to manual on/motion off
YanXS wrote @diysam I'm all about beta testing. Feb 11 is right around the corner and I will not get stuck with a switch that's not working as the original purpose for puchasing it. I'm happy to test...
1HELPFULS
Forums/ Kasa Smart Switches
2023-02-01 05:46:32
Re:KS230 KIT V2 - red light
@Dragontigre Nice we have options, and even more so with the "Matter" standard. But last I checked a few months ago, I couldn't find any real viable 3 way smart dimmer where both switches were in...
0HELPFULS
Forums/ Kasa Smart Switches
2023-01-28 08:13:11
Re:Switches will not connect to 802.11ax (WIFI6) but work on 802.11n
HomeLabCan wrote @LearnTO Yes I tried to reset them, but even then they did not see the SSID in the iOS app. I ended up using an old Asus RT-N16 and used the old SSID in 802.11n mode. Not the ideal...
0HELPFULS
Forums/ Kasa Smart Switches
2023-01-24 04:34:51
Re:KS230 KIT V2 - red light
@Dragontigre Since the KS230 v2 powers on.. this should mean you got the line and neutral right. However the KS230 v2 will flash red until the traveller wires are conected to the dummy switch. If the...
1HELPFULS