ShoresyLV2Online
Following: 0Followers: 0
Forums/ Omada Access Points
2023-08-29 14:31:26
Re:Random Fail to Readopt with EAPs
@MR.S I'm still on firmware v1.0.6 on all EAP670 devices. I believe this firmware has been out for several months. Rebooting every TP-Link device on the network resulted in all EAP670's going from...
0HELPFULS
Forums/ Omada Access Points
2023-08-29 13:57:53
Re:Random Fail to Readopt with EAPs
@MR.S Yes, similar issue...first occurrence was 2 days ago, will have to see if this happens every couple of days. Did Power Cycling the EAP670 resolve the issue entirely, or are you still having...
0HELPFULS
Forums/ Omada Access Points
2023-08-29 13:18:23
Random Fail to Readopt with EAPs
TP-Link network specs: EAP670 x 4 (v1.0) all on firmware 1.0.6 EAP610 Outdoor x 1 (v1.0) on firmware 1.2.0 4 TP-Link Jetstream switches Omada Controller v5.12.2 running on Windows 11 x64 PC w/32GB of...
0HELPFULS
Forums/ Omada Access Points
2023-04-27 20:33:30
Re:Configure Omada controller with Pfsense
As others have mentioned, all of your WAN-related configs will be done on your pfSense router, not within the Omada GUI. You'll use the Omada GUI to configure your Wifi settings, SSID's, switch port...
0HELPFULS
Forums/ Omada Access Points
2023-03-28 13:17:44
Re:EAP610-Outdoor - Is it really Omni-Directional?
Keep in mind that if beamforming is enabled (which it is by default) and there are devices that utilize it out in a specific area or direction, all bets are off for omnidirectional signal.
0HELPFULS
Forums/ Omada Access Points
2023-03-27 15:44:43
Re:EAP610-Outdoor - Is it really Omni-Directional?
I also have an EAP610-Outdoor and agree with your assessment. Signal is weak from the sides and much stronger out the front and the back. Strongest signal is in FRONT of the EAP610-Outdoor, and where...
0HELPFULS
123...13