@Virgo 　 Sorry for my late reply. After Changing Route 2 EAPs' channel wide apart in 5.6GHz band, it has been stable now. However, The recommended 6Ghz band channel could not be selected. Site...

@Virgo Yes, All the EAPs are EAP650-outdoor and these are EU Version. Here In Japan as well as in the EU, 5.2-5.3GHz band cannot be used outdoors. 5.6GHz band is allowed in Japan, so I would like to...

Even though channel limit is enabled in the OC200 site settings, the route EAP's channel sometimes changes to a channel in the 5.2-5.3GHz band. Once the root channel is changed, the mesh EAPs be...

@Virgo With your help, the mesh network has been re-connected. Not only hardware reset, but also some change of settings were needed. Despite channel restrictions in the site settings, one of the...

@Virgo thank you for your reply. It seems to be effective to try resetting it several times, not just once. I'm planning to exchange some of the EAPs' position tomorrow, so I'll try resetting...

@KimcheeGUN thank you for your reply. KimcheeGUN wrote @Ogy It seems like it worked before... but have you checked to see if there is enough signal to link out there? I also checked the previous...