@Martin-2 You can examine your time zone settings. Make sure the time is synced correctly on the NVR local, camera, and the remote site.

@TTSI TTSI wrote @Clive_A 25x5 Mbps. 24500 Kbps and 4500 Kbps Under 50Mbps, you should use QoS together with the bandwidth control. Above 50Mbps, you can use bandwidth control alone.

@Martin-2 Martin-2 wrote Hello, i have strange problem with Vigi NVR - When i connecting it remotely via web broswer (PC) and switch to "Playback" then i choose camera to play, it will be stuck on...

@Hayden-N Hayden-N wrote @Clive_A 1. Yes, the server is accessible from the local network, as confirmed by telnet 192.168.0.100 on each of the ports. 2. Yes, I have verified the port forwarding...

@arrmo arrmo wrote @Clive_A Will do, but ... from the CLI, it only says my switches are supported, not my gateway? Thanks! Try the SSH. One thing to notice is that adding entries to LAN DNS might not...

@brizzio Telemetry is a common practice for any network product nowadays. When you agree to the Terms of Use, you allow that action. If you want to block that, ACL does not seem to be the proper way....