@MNG8591 All three showed the blank in the stats, it could be that OC300 lost the connection or adoption to the devices. With or without the OC, the system can still function. Only the features that...

@PROXYTEC PROXYTEC wrote @Clive_A so after 24 hours since I changed the connection from Module TL-SM5310-T (UN) Version 1.0 to Direct Attached Cable SM5220-1M (TL-SM5220-1M). There no NO paket loss...

@GRL @MR.S GRL wrote @268BBA Its still not working for most of us, me included ER8411, ARP detection enabled on all interfaces. OC300 latest controller. All ES switches are on latest firmware, and...

@bob1202 Wireshark and see what's like on the uplink port in two different situations: 1. When ACL is not involved. 2. ACL is involved. Have you tried to specify the destination IP and ports in the...

@Nani88888 1. Make sure your firmware is up-to-date. Check online or go to the official website. 2. Not sure what AP you use. Have you tried a wired connection to the ER7212PC directly and will it...

@Col_H You can consider upgrading the firmware: https://support.omadanetworks.com/en/product/dr3650v/v1/?resourceType=download And monitor if this persists.