pleased wrote You will notice, R1D2, that your link recommends a "loop" for the VLAN configuration just like I have. In addition, all VLAN memberships for the router port are untagged. In addition, I...

R1D2 wrote You did create a loop by assigning all ports to two VLANs with the setup outlined in #3 (ports 1 to 8 in VLAN 1). To share an Internet connection on port 1 with two VLANs 2 and 3, port 1...

If all your ports are flashing synchronously, I believe your switch has "crashed" and going crazy with XMAs-lights style LEDs - If you run a speedtest through the switch, 99% chance your Xfer speed...

This unmanaged switch question should not be listed in these Smart Switch forum section. The first step to find answers is to look in the forum corresponding to your gear, ok?

TL-SG108 is a plug-n-play easy switch not the smart version. No login and no tool. Keep that unit as a spare and go buy a switch that has a "E" like TL-SG108E_V3: the newest 8 port type, yet V2 is...

Model : Hardware Version : Firmware Version : ISP : I am using "Port Based QOS" to enforce frame priorities consistently without relying on all packets being pre-tagged properly for 802.1P or DSCP....