M@riusLV1Offline
Following: 0Followers: 0
Forums/ Pharos Wireless Bridges
2017-10-01 01:00:03
Re:How do I connect 3 buildings using CPE510 hardware
also ping time to the second CPE is excellent 2-3 ms . I'm quite happy with this
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-10-01 00:51:44
Re:How do I connect 3 buildings using CPE510 hardware
hmmm .... something changed for the better in802.11a, AP is at 100% and the client at 80 - 93 %, some times drops to 68
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-10-01 00:42:34
Re:How do I connect 3 buildings using CPE510 hardware
RTouris my setup is quite direct with cable just 3 m long, let me explain, from my house I have a CPE in AP mode, 1,6 km away on a pole I have a CPE in client mode and from it with PoE passthrougt...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-09-29 01:12:31
Re:How do I connect 3 buildings using CPE510 hardware
I'm back :) . I have resolved the last issue, I have added a 3 m extension to my pole and now that connection is working excelent. I need your help for the firs pair , distance 1,6 km, again height...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-05-07 18:42:05
Re:How do I connect 3 buildings using CPE510 hardware
Yes, I made for them a custom mounting bracket with a joint that allows me to orientate them up or down ... but no results ... I'm thinking to use some laser to aline them
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-05-07 13:33:16
Re:How do I connect 3 buildings using CPE510 hardware
Hello, I have some trouble with getting align the second pair, as you can see in the picture first antenna, set as AP is on the top of a hill mounted on a post and the second one is at the bottom of...
0HELPFULS
12