@Clive_A Yesterday I updated to the new firmware 1.3.1 and everything worked without errors, but today I had some micro-cuts as well. I did not get any PADI or PADR or authentication errors with the...

Here can see, after create my post, few hours have peaks on CPU. Now router is configured in DHCP and have random disconections everytime have peak on the CPU. And disconections affect SFP+WAN1 and...

Hello, I’m experiencing issues with my ER8411 router running firmware 1.2.3 Build 20241121 Rel.21021 when using a 10Gb WAN connection. I’ve tested two different setups and encountered the following:...

@Clive_A This is how I did the test, one computer per WAN, and when I do this the total capacity adds up to 1Gb but no more than this. That's why I opened the thread here and am asking what could be...

@Clive_A Yes, the problem is that I have never achieved total speeds above 1gbps. That is, in a test environment, if I do 4 speed tests at the same time with 4 different networked computers, one for...

@Clive_A I have set it to 0 - 1-1-1-1 because the 0 corresponds to the active WAN SFP+ port, which cannot be deactivated (in previous firmware versions, it could be). If it is set to a number greater...