@Shelf08 Firstly, your switch should be after the first main Deco, not before it. As you have your modem in bridge mode, the first Deco is your main and DHCP server, the switch must be after this...

@Rebellion158 Public and beta firmware version 1.2.0 have many critical bugs, yes they used the same version number for some off reason, however, a newer early release version is available which is v...

@kutzki I'd suggest you install the early pre-release firmware 1.2.10 from the support link below, which resolves a lot of issues that are in the public/beta release firmware 1.2.0 and same for BE25...

@Danny11515 I would strongly suggest you install the early release firmware available at the support link below. Firmware version 1.2.0 has many critical bugs, which are noted across the support...

@Boeau I'd suggest trying the early release firmware available for the BE25 at the following forum address: https://community.tp-link.com/en/home/forum/topic/848116?sortDir=DESC&page=1

@MaKTaiL Firstly, you're running public firmware version 1.2.0 and it is full of critical bugs. I would suggest you download the latest early release firmware version 1.2.10 and you'll find a much...