NorthHillLV1Online
Following: 0Followers: 0
Forums/ Switches
a week ago
Re:TL-SG3210XHP-M2 Switch very slow after adoption
Clive_A wrote Not sure why you are insisting on getting 2.5Gbps. As for now, 900Mbps is the normal speed you should get between them. You have all gigabit devices but only a switch that's 2.5Gbps....
0HELPFULS
Forums/ Switches
a week ago
Re:TL-SG3210XHP-M2 Switch very slow after adoption
@Clive_A Okay, after a little more digging, I found out that I had enabled the firewall (and forgotten that I had done so) on the server that was directly connected to ER7206. Once that was disabled,...
0HELPFULS
Forums/ Switches
a week ago
Re:TL-SG3210XHP-M2 Switch very slow after adoption
@Clive_A Okay, I have a server attached directly to the ER7206. I can run iperf from the server out to devices connected both to SG2008 or SG3210XHP. However, I cannot send iperf from devices on...
0HELPFULS
Forums/ Switches
2 weeks ago
Re:TL-SG3210XHP-M2 Switch very slow after adoption
Yes, slow speed. Yes, I have done fairly extensive iperf testing. I did some testing yesterday. Anything connected to the SG3210XHP-M2 was getting speeds averaging 360-450mb. Today, I attempted...
0HELPFULS
Forums/ Switches
2 weeks ago
Re:TL-SG3210XHP-M2 Switch very slow after adoption
@Clive_A I have checked the logs and I do not see any issues there.Any other ideas?
0HELPFULS
Forums/ Switches
2 weeks ago
Re:TL-SG3210XHP-M2 Switch very slow after adoption
@Clive_A Thank you for your response and trying to help me. No, it is not like that. The 2008P and 3210XHP are independently attached to the gateway on different ports, independent from one another....
0HELPFULS
12