Hi @_be_ Thanks for posting here. Here are some suggestions you may try: Verify LLDP Settings: Ensure LLDP is enabled on all switches (including non-Omada ones). Disable and re-enable LLDP in the...

phelpsIO wrote @Vincent-TP Hello Vincent, would it possible to get the firmware for the EAP773 still? I'm hoping it might address the issues im having using the 6Ghz band in Ukraine, which has been...

@k1mu Thanks for posting here. Theoretically, there should be no issue. As long as the wiring is convenient and the configuration is manageable, it should work fine. By default, the ports on the...

Hi @monviso Thanks for posting here. This is most likely because the wireless channel supported by the CPE differs from the channel of the SSID broadcast by your router. You can first try configuring...

Hi @flyinghobbit Thanks for posting here. We don't have a EAP model EAP635, but EAP653, are you using this model? To better understand the situation, please give us the following info: 1. A...

Hi @A_Mansoor Thanks for posting here: As GRL mentioned, different VLAN interfaces can communicate with each other by default, so no additional ACL configuration is required to allow access between...