Hi @UniFly Firstly, EAP610 is not compatible with controller V3. It's too old, so let's focus on the controller v5 issue. but when I try to exit the controller, I can't log in again, when I press...

Hi @wacNTN You can do that by changing the SSID and password to the same as your main routers. for normal clients, they will roam between the two networks automatically. Below is the step-by-step...

Hi @shugart_lance Will the issue disappear if downgrade them to 5.1.1? Are the CCTV system the only clients to the EAP? Do other clients have any Internet issue?

Hi @youbarajsha Yes, there was some change on the cloud platform. I believe you were on the cloud-based system tab, which is the wrong page. OC200 is On-premise system, and go to that tab, you should...

Hi @Evanloh2001 Yes, you can do this. For detailed steps, please refer to the following guide: How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding...

Hi @Cebujohn When did the issue occur? Offline means the OC200 is disconnected from the tp-link cloud server, you may check the Internet stability of the OC200 site.