KajooLV1Offline
Following: 0Followers: 0
Forums/ Pharos Wireless Bridges
2018-03-03 00:25:43
Re:CPE210 Reset to Factory default with 8 IP cameras after few days
Unfortunately, I had a reset two days ago on the repeater that have only power pairs attached to it. Meaning, it has no relationship with the POE Adapter.I was logging every power surge during this...
0HELPFULS
Forums/ Pharos Wireless Bridges
2018-02-28 05:36:12
Re:CPE210 setting ot maxpower of 27dbm
Hi guys, sorry to ressurrect this thread, but I couldn't find a similar analysis for CPE220, which I believe should be a very similar HW, but with a 12dBi antenna. I could get the 501mW from a CPE210...
0HELPFULS
Forums/ Pharos Wireless Bridges
2018-02-26 22:46:40
Re:CPE210 Reset to Factory default with 8 IP cameras after few days
Hi R1D2... first of all thanks for all the feedback. We have updated a few things in our installation that seems to have improved stability. 1- We've cut the wire to ensure NO RESET could happen from...
0HELPFULS
Forums/ Pharos Wireless Bridges
2018-02-21 00:57:32
Re:CPE210 Reset to Factory default with 8 IP cameras after few days
Let me try to understand the feedback around proper ground. My router is installed outside a house in the wall to provide better outdoor coverage for multiple devices. If I don't ground it, then cpe...
0HELPFULS
Forums/ Pharos Wireless Bridges
2018-02-18 20:09:43
Re:CPE210 Reset to Factory default with 8 IP cameras after few days
5 in total... Some are Hw v1.1, others are v2... The cable is around 10 meters long. I didn't ground the cpe and the power is not stable at all. It is a farm structure and power will switch to a...
0HELPFULS
Forums/ Pharos Wireless Bridges
2018-02-15 05:18:22
CPE210 Reset to Factory default with 8 IP cameras after few days
Model : Hardware Version : Firmware Version : ISP : Settings lost after few days [COLOR=#333333]Region : Brazil Model : CPE210 Hardware Version : V2 Firmware Version :...
0HELPFULS
12