@Ysabelle Does this happen after a firmware update or during normal operation? In my case, the camera lost its position after every firmware update, and the saved default positions were no longer...

need

@Hank21 In this case, a Fritzbox with a 100.xxx.xxx.xxx IP address is used, which operates in bridge mode, followed by an Omada ER7212PC gateway, which manages the APs and end devices as well as...

@Riley_S Have you enabled the Wi-Fi security feature in the camera's network settings? Yes, that has already been done. I would also recommend selecting the hub as the storage location, if you...

It is urgently necessary to arrange the privacy zones in a polygon, as otherwise areas that should not be recorded will always be recorded. It is also not helpful that currently 4 squares can be...

Hello, the Camera C460 KIT keeps connecting to an AP whose RSSI value is limited to -70db, so the camera automatically connects to the H500, which has better signal strength. The app shows that the...